学习中心

Course:

Getting Started with COMSOL Multiphysics®

Introductory Video Series

Getting Started with COMSOL Multiphysics®


If you are new to simulation or using COMSOL Multiphysics®, this article will connect you to a series of self-guided tutorial videos that provide a comprehensive introduction to modeling with the software. These videos outline our procedure for setting up, building, and computing models, which we refer to as the modeling workflow. You will see the workflow steps in action, including:

  • Building the geometry
  • Including definitions
  • Adding materials
  • Defining the physics
  • Meshing
  • Performing a study
  • Analyzing and visualizing the results
  • Building a simulation app

There are relevant model files and additional resources included to complement the videos. Log in to COMSOL Access to track the videos you've watched. To start the series, click the button below:

The COMSOL Multiphysics UI showing the Model Builder window with Temperature Surface Plot selected, the Settings window, and the Graphics window with a busbar model and temperature plot. The COMSOL Multiphysics UI showing the Model Builder window with Temperature Surface Plot selected, the Settings window, and the Graphics window with a busbar model and temperature plot.
The Model Builder workspace in COMSOL Multiphysics® is shown with a model of a busbar open and a temperature plot indicating the the results of the simulation.


请提交与此页面相关的反馈,或点击此处联系技术支持