科技论文和展示

这里您可以找到在全球 COMSOL 年会上所有用户报告的演示文稿。这些演示文稿介绍 COMSOL 用户是如何使用 COMSOL Multiphysics 进行创新性研究和产品设计。研究主题涵盖了包括电气、机械、流体和化工等范围广泛的行业和应用领域。请使用“快速搜索”来查找与您的研究领域相关的演示文稿。

Simulation of Novel Groundwater Lowering Technique using Arbitrary Lagrangian-Eulerian Method

Y. Jin, E. Holzbecher, and P. Oberdorfer
Applied Geology
Geoscience Centre
Georg-August-University Göttingen
Göttingen, Germany

A novel method for groundwater lowering, which can be applied at construction sites, for aquifer remediation measures or in open mining, is proposed. In contrast to conventional techniques, dewatering is achieved without water conveyance. In this paper the physical concept of the new technology, referred as single borehole pump & inject, is modeled using COMSOL Multiphysics. Two and three ...

Ability of Single-Well Injection-Withdrawal Experiments to Estimate Ground Water Velocity

F. Maier[1], K. Hebig[2], Y. Jin[1], and E. Holzbecher[1]
[1]Georg-August Universität Göttingen, Göttingen, Germany
[2]Technical University Berlin, Berlin, Germany

The authors present a closer look on the Single-Well Injection-Withdrawal Experiment (SWIW) or Push-Pull Experiments and its ability to determine the groundwater velocity, as one of the major parameters concerning reservoir management and underground reservoir characterization. The flow field is modeled using analytic and numerical solutions. Different modes like Darcy-law, solute-transport and ...

Using Computational Multiphysics to Optimise Channel Design for a Novel PEM Fuel Cell Stack

F. A. Daniels[1], D. J. L. Brett[1], A. R. Kucernak[2], and C. Attingre[2]
[1]University College London, London, UK
[2]Imperial College London, London, UK

Polymer electrolyte membrane (PEM) fuel cells have significant potential as a source of clean, efficient energy production. This study presents a three-dimensional, non-isothermal, fully-coupled model of a PEM fuel cell with printed circuit board current collectors. The effect of the current collector design on transport phenomena and consequent cell performance is investigated. The model ...

Xylophone Bar Magnetometry and Inertial-grade MEMS Optimisation: a Multiphysics Approach

H. T. D. Grigg, and B. J. Gallacher
Microsystems Group
Newcastle University
Newcastle upon Tyne
Tyne and Wear, UK

This paper presents ongoing research aimed at development of a MEMS magnetometer capable of nanoTesla sensitivity. Such a device would pave the way for inertial-grade MEMS IMUs. A resonant sensor is proposed, based on a Xylophone Bar sense element, and is analysed both directly and via COMSOL. Mode shapes and frequencies are found as functions of geometric parameters, and the results used ...

Excimer Laser-Annealing of Amorphous Silicon Layers

J. Förster, and H. Vogt
Institute of Electronic Components and Circuits
University Duisburg-Essen
Duisburg, Germany

A one-dimensional model of Excimer Laser-Annealing of amorphous silicon layers which are irradiated with a KrF excimer laser is described. For realisation, the application mode heat transfer in solids is used. The model predicts a melt threshold for the energy density of the laser of 88.5 mJ/cm^2. It also predicts a linear increase of the melt duration with a slope of approximately 625 ...

Fluid Flow and Current Density Distribution in Large-area HT PEMFCs

G. C. Bandlamudi[1,2], C. Siegel[2], C. Heßke[1], and A. Heinzel[1,2]
[1]ZBT Duisburg, Duisburg, Germany
[2]University of Duisburg-Essen, Duisburg, Germany

High temperature polymer electrolyte membrane fuel cells (HT PEMFCs) are very promising technologies when used in combined cooling and heating power (CCHP) systems. They are operated at 160°C, offering the possibility of high tolerance to fuel impurities and a possibility to use the heat generated for cooling and heating purposes, leading to higher total system efficiency. Employing a ...

Quick Search

181 - 186 of 186 First | < Previous | Next > | Last