案例集锦

COMSOL Multiphysics 案例库模型来自广泛的应用领域,包括电气、机械、流体和化工等行业。您可以下载现成即可使用的模型,以及详细的建模步骤说明,作为您建模工作的起点。请使用“快速搜索”查找与您的专业领域相关的模型,并登录或创建一个与有效的 COMSOL 许可证相关联的 COMSOL Access 帐户,下载模型文件。

Uniform Layer Waveguide

Whenever dimensions in waveguides become small compared to the viscous and thermal boundary layers it is necessary to model acoustics using thermoacoustics. In the present model the thermoacoustic wave field in a shallow uniform waveguide is modeled and compared to an analytical solution.

Bessel Panel

The Bessel panel is a way to arrange a number of loudspeakers so that the angular sound distribution resembles that of a single speaker. This model combines five Bessel panels in the same pattern to approximate a purely radial sound field. The speakers are driven with different signals, some of them in counter-phase. This results in an approximately homogeneous polar far-field ...

Acoustic Muffler with Thermoacoustic Impedance Lumping

This model utilizes the thermoacoustic interface in a submodel to obtain a detailed (and more precise) measure for the transfer impedance of a perforated plate. The impedance is in turn used as an internal impedance in a pressure acoustic model of a muffler. Results are compared to classic impedance models.

Jet Pipe

This example models the radiation of fan noise from the annular duct of a turbofan aeroengine. When the jet stream exits the duct, a vortex sheet appears along the extension of the duct wall due to the surrounding air moving at a lower speed. The near field on both sides of the vortex sheet is calculated. The Aeroacoustics modeling interface in the Acoustics Module describes acoustic waves in a ...

Vibrating Particle in Water: Correct Thermoacoustic Material Parameters

This is a tutorial model that simulates a small vibrating hemispherical particle in water. The vibrations induce acoustic waves in the fluid. The model shows how to set up the material parameters in a thermoacoustic model to get the correct acoustic (compressible) waves in the fluid.

Eigenmodes in a Muffler

In this model, compute the propagating modes in the chamber of an automotive muffler. The geometry is a cross-section of the chamber in the Absorptive Muffler example. The model’s purpose is to study the shape of the propagating modes and to find their cut-off frequencies. As discussed in the documentation for the Absorptive Muffler, some of the modes significantly affect the damping of the ...

Lumped Receiver Connected to Test Set-up with an 0.4-cc Coupler

In this model a Knowles ED23146 receiver (miniature loudspeaker) is connected to a test set-up consisting of a 50 mm (1 mm diameter) earmold tube and a so-called 0.4-cc coupler. The receiver is modeled using a lumped spice network and connected to the finite element domain at the tube inlet. The response at the measurement microphone in the coupler as well as the electric input impedance to the ...

Small Concert Hall Acoustics

Designing structures and open spaces with respect to sound quality is important for concert halls, outdoor environments, and even the rooms of a house. Simulating acoustics in the high-frequency limit, where the wavelength is smaller than the geometrical features, can be done with ray acoustics. There are several advantages to modeling ray acoustics, including changing media properties, ...

One-Family House Acoustics - new

This model shows an application of the Acoustic Diffusion Equation physics interface. The acoustics in a two story one-family house consisting of 10 rooms is analyzed. The steady state sound pressure level (acoustic energy density) distribution is analyzed for a sound source located in the main living room. The reverberation time T60 of the different coupled rooms is then studied using the ...

Microphone grid free-field level correction curve for plane-wave incidence

This is a conceptual model of a microphone placed in an infinite baffle (flush mounted). The purpose is to determine the free-field level correction curve of the setup, which includes the exterior domain, microphone grid, and volume between the grid and the diaphragm. The microphone diaphragm is characterized with a simple RCL impedance and the open radiation condition is modeled with a Perfectly ...

Quick Search