Heat Transfer in a Surface-Mount Package for a Silicon Chip

Model ID: 847


All integrated circuits—especially high-speed devices—produce heat. In today’s dense electronic system layouts heat sources are many times placed close to heat-sensitive ICs. Designers of printed-circuit boards often need to consider the relative placement of heat-sensitive and heat-producing devices, so that the sensitive ones do not overheat.

One type of heat-generating device is a voltage regulator, which can produce several watts of heat and reach a temperature higher than 70°C. If the board design places such a device close to a surface-mounted package that contains a sensitive silicon chip, the regulator’s heat could cause reliability problems and failure due to overheating. This simulation investigates the thermal situation for a silicon chip in a surface-mount package placed on a circuit board close to a hot voltage regulator. The chip is subjected to heat from the regulator and from internally generated heat.

This model was built using the following:

Heat Transfer Module

请先登录您的 COMSOL Access 帐户,然后下载文件。*