3D Model of an ICP Reactor with Argon Chemistry

Model ID: 8661


3D plasma modeling is possible to do in COMSOL. A square coil is placed on top of a dielectric window and is electrically excited at 13.56MHz. A plasma is formed in the chamber beneath the dielectric window, which contains Argon gas at low pressure (20 mtorr). The gas flows into the process chamber from two 2 inch ports and the gas is extracted through a single 4 inch port. The plasma is sustained via electromagnetic induction where power is transferred from the electromagnetic fields to the electrons.

This model was built using the following:

Plasma Module

请先登录您的 COMSOL Access 帐户,然后下载文件。*