Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Projection coupling in Comsol 4

Posted 2010年6月9日 GMT-4 10:30 Low-Frequency Electromagnetics Version 4.0 2 Replies

Danial Tz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Yet with another how-to-use on Comsol 4.

Similiar to Comsol 3 I tried to use a projection coupling variable to project a "u" from boundary A to "u" on boundary B.

Model: www.gliffy.com/pubdoc/2140940/L.png

Here I want to project "u" from the inner circle to the outer one, so I can use "u" on the outer boundary. In Comsol3 all I needed to do was to add 3 red vertices as source and 3 blue ones as destination. But, in Comsol 4 it doesn't work that way. It always says illegal vertices. Help file is not enough at all to solve it on my own.
2 Replies Last Post 2011年8月11日 GMT-4 12:56
Danial Tz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年6月9日 GMT-4 16:35
Oops! It should have been extrusion variable, and yes, that was the source of confusion :) problem solved.
Oops! It should have been extrusion variable, and yes, that was the source of confusion :) problem solved.
Leanne Nixon
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月11日 GMT-4 12:56
I'm having the same issue with the error "illegal vertex selection". Would you be able to explain what you did in a little more detail to get around this issue?

Thanks,

Leanne
I'm having the same issue with the error "illegal vertex selection". Would you be able to explain what you did in a little more detail to get around this issue? Thanks, Leanne

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content