Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Tightly folded Inflatable structure deployment simulation possible in comsol ?

Please login with a confirmed email address before reporting spam

Hi,

We have a problem where we need to simulate the deployment of a tightly folded inflatable structure. I have used explicit ALE method in a different software to achieve this, however it takes a long time to solve as the simulation time is 4 seconds. And I need to use a finer mesh but that would reduce my timestep and time to solve would be unrealistic.

I believe one solution is to switch to an implicit solver. Can comsol handle such a problem ? From my experience it needs to handle non-linear contacts, fluid - structure interaction and large deformations of the fabric.

Any info would be appreciated.

Thanks,
Shiva

0 Replies Last Post 2013年3月14日 GMT-4 01:12
COMSOL Moderator

Hello shiva mogili

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.