Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

modeling of bone

Please login with a confirmed email address before reporting spam

Hello!
I wanted to know if it is compulsory to use an equation based model if we are 2 study some stress and force properties on a 3-d model say bone.Given appropriate parameters and material details to the geometry,does it solve the purpose of representing a bone? Any help would be deeply appreciated.

2 Replies Last Post 2013年1月12日 GMT-5 06:24
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月12日 GMT-5 03:39
Hi

Bone is a porous material, most probably non linear, certainly if you are on "long term" time scale, but if you have the equivalent material properties you could at least work in the linear elastic regime

--
Good luck
Ivar
Hi Bone is a porous material, most probably non linear, certainly if you are on "long term" time scale, but if you have the equivalent material properties you could at least work in the linear elastic regime -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月12日 GMT-5 06:24
Thank you Sir for the guideline.
Thank you Sir for the guideline.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.