Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

prescribed dispacement

Please login with a confirmed email address before reporting spam

Hello, I'm trying to do a simple thing with structural mechanics module, but I don't get convergence. I attached the model. I'd like to apply a prescribed displacement at boundary 2 and check the deformation of the structure when some other are free or fixed. Any advise?
Thanks


1 Reply Last Post 2012年12月19日 GMT-5 08:07

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年12月19日 GMT-5 08:07
Hi Nicolas

You have taken critical Poissons ration = 0.5, to help solver converge try to take Poissons ratio like 0.499. It will converge. And in geometry you may choose micrones not meters.

Hi Nicolas You have taken critical Poissons ration = 0.5, to help solver converge try to take Poissons ratio like 0.499. It will converge. And in geometry you may choose micrones not meters.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.