Filament shape over fixed extremities

Please login with a confirmed email address before reporting spam

Goodmorning,

I would like to ask some help on how to determine the shape of a filament with the two extremis held in place by a couple of mechanical joints. I would like moreover to export the obtained shape into a geometry that I can use in another simulation.

Thank you very much for the support. Cheers


1 Reply Last Post 2023年12月12日 GMT-5 09:07
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 months ago 2023年12月12日 GMT-5 09:07
Updated: 5 months ago 2023年12月12日 GMT-5 09:21

Hello Pietro,

You seem to be describing a catenary problem. If so, the approach described in this blog post is what I would try.

Best,

Jeff

-------------------
Jeff Hiller
Hello Pietro, You seem to be describing a catenary problem. If so, the approach described in [this blog post](https://www.comsol.com/blogs/how-to-solve-for-the-brachistochrone-curve-between-points/) is what I would try. Best, Jeff

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.