Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

computing in comsol

Please login with a confirmed email address before reporting spam

The 3D plot group appears light green throughout the model. There is no error indication. How to get the correct result.
I am simulating a spin based device. Many materials I have incorporated are user defined.Is it because of that? or else what should i do?Please help.

Regards
Jeevi

1 Reply Last Post 2012年10月15日 GMT-4 05:16
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年10月15日 GMT-4 05:16
Hi

often light green corresponds to "0" the initial condition by default of COMSOL. perhaps your model is missing some source factor

--
Good luck
Ivar
Hi often light green corresponds to "0" the initial condition by default of COMSOL. perhaps your model is missing some source factor -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.