Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Vibrating Cantilever Beam in Fluid

Please login with a confirmed email address before reporting spam

Hello all, I've been constantly trying to get this model to work. My model consists of a cantilever beam that is submerged in a fluid tank and I am applying a sinusoidal prescribed displacement on the sides of the circular hole. My desired output is the displacement of the other end of the cantilever beam, however when I run this model it does not converge.

Please help



2 Replies Last Post 2022年8月7日 GMT-4 09:52
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2022年8月5日 GMT-4 08:47

Hello Megan,

The file you attached is the .lock file. What participants in the Discussion Forum would need to help you is the .mph file.

Best,

Jeff

-------------------
Jeff Hiller
Hello Megan, The file you attached is the .lock file. What participants in the Discussion Forum would need to help you is the .mph file. Best, Jeff

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2022年8月7日 GMT-4 09:52

Thank you Jeff here is the mph file

Thank you Jeff here is the mph file

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.