Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Calculating Phase of the electric field at dielectric interface.

Please login with a confirmed email address before reporting spam

Hello. I have a very basic problem of calculating phase difference of different components of electric field along the dielectric interface. In my model, I incident a plane polarized electric field by using port boundry condition. The reflectance and transmittance I have calculted. However I wanted to see the phase relationship amongs the various components of the electric field across the boundry. I used the "arg( expression of field)" expression to get the phase by making a line cut perpendicular to interface. But I didn't get the satisfactory result. Can anyone suggest the possible way to do it. Thank you


2 Replies Last Post 2021年1月4日 GMT-5 20:46
Robert Koslover Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2021年1月4日 GMT-5 16:17

Either there is an error in your model set up, your post-processing, or in your interpretation of the results. I suggest you post your model to the forum.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Either there is an error in your model set up, your post-processing, or in your interpretation of the results. I suggest you post your model to the forum.

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2021年1月4日 GMT-5 20:46

Thank you sir @Robert Koslover for your reply. I am new at comsol so their might be some error in my model as you suggested. Here I am attaching .mph file for my model. Thank you

Thank you sir @Robert Koslover for your reply. I am new at comsol so their might be some error in my model as you suggested. Here I am attaching .mph file for my model. Thank you

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.