Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

computation error

Please login with a confirmed email address before reporting spam

As I try to solve my 1D problem with 3 diffusion modes in COMSOL 4.1, I keep getting this following error message:

Undefined value found.
- Detail: Undefined value found in the stiffness matrix.
There are 261 equations giving NaN/Inf in the matrix rows for the variable mod1.c2
at coordinates: (0), (0.0005), (0.001), (0.0015), (0.002), ...
There are 261 equations giving NaN/Inf in the matrix rows for the variable mod1.c3
at coordinates: (0), (0.0005), (0.001), (0.0015), (0.002), ...
and similarly for the degrees of freedom, NaN/Inf in the matrix columns

What does this mean? I am using the same exact constants and expressions I used to solve the problem in COMSOL 3.5, which solves the problem just fine.

1 Reply Last Post 2011年4月18日 GMT-4 17:15
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月18日 GMT-4 17:15
Hi

obviously something has changed in the BC's, check the release notes. there were a few things 3.5 permitted that were not really physical and that have been "corrected" in V4, so they must be coded slightly differently, but I'm not specifically aware of your case

--
Good luck
Ivar
Hi obviously something has changed in the BC's, check the release notes. there were a few things 3.5 permitted that were not really physical and that have been "corrected" in V4, so they must be coded slightly differently, but I'm not specifically aware of your case -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.